Edit the rounding and truncation settings for a Bearing, Distance, Area, Offset, Grade or Combined text style.
Manage / Configuration / Text / Styles / Bearing or Distance or Area or Grade or Offset / 
or
/ Rounding
Manage / Configuration / Text / Styles / Combined /
or
/ 
/ Rounding
Available controls are dependent upon the text style being edited.
| Control | Description |
|---|---|
| Distance Below | Type a distance value (in the project units) below which the Round To and Truncate settings apply. |
| Area Below | Type an area value (in the project units) below which the Round To, Truncate and Unit settings apply. |
| Grade Below | Type a grade value below which the Round To and Truncate settings apply. |
| Round To | Select the rounding option. |
| Truncate |
Select one of the following truncation options:
|
| Unit | For area text, select the units to use to output the text. Note:
|
- The length of the line is used to truncate and round bearings.
- Truncation is applied to the rounded number.
- Input the Grade Below value for an Angle grade type with units Degrees Decimal Minutes in minutes.
- Input the Grade Below value as an absolute grade.
The following are examples of the resulting text when the different Truncate options are used with distances, areas or grades (Ratio or Percentage).
| Truncate | Example 1 | Example 2 |
|---|---|---|
| None | 123.400 | 321.000 |
| Trailing Zeros | 123.4 | 321. |
| Decimal Point | 123.400 | 321 |
| Both | 123.4 | 321 |
The following are examples of the resulting text when the different Truncate options are used with bearings or angular grades.
| Truncate | Example 1 | Example 2 | Example 3 |
|---|---|---|---|
| None | 123°00'00.0" | 123°00'02.0" | 123°40'00.0" |
| Seconds | 123°00' | 123°00'02.0" | 123°40' |
| Minutes | 123° | 123°00'02.0" | 123°40' |
