Process Measurements

Description

Validate and process measurements.

Access

Measurements / Process

Requirements

Measurements imported via an appropriate Data Import or entered via manual input.
Equipment details listed in the Measurement view beneath the Configuration node.
Known station coordinates listed in the Configuration node.

Controls

Control	Description
	Click to input the measurement processing options.
	Click to generate a station setup report for all TPS setups.
	For the selected measurements, click to : Perform the selected adjustment Reduce the measurements Note: Coordinates and objects are not updated in the model view.
	For the selected measurements, click to : Perform the selected adjustment Reduce the measurements Process the codes Note: Coordinates and objects are updated in the model view.

Notes

All 'Included' observations that branch from the selected node will be included in the processing.
To include all data types in the data processing, select the Measurement node.
To exclude observations from the processing clear the Included column or select a node that the observation does not branch from.
Specify the type of adjustment in the Measurement Processing Options.
When performing a 2D network adjustment on GNSS and/or terrestrial observations, ensure the Level adjustment method is set to 'None'. To include level data in an adjustment with GNSS and/or terrestrial observations, set bothLevel and Total Station and GNSS to 'Network (3D)'.
Choose to process feature code processing in the Measurement Processing Options.
When importing field measurements, ensure you select the Options button in the import dialog and turn on Import Measurements checkbox.
If modifications to objects on a locked layer is required the entire operation will fail.
Measurements to control points will be used to compute check coordinates only.
For best results use a NTv2 binary grid (.gsb) geoid model.