Add, edit or delete traverses defined from total station measurements.
Measurements / View / 
/ 
or 
/
, 
or 
- Adjust module
- Measurements imported via an appropriate data import or entered via manual input.
The following editing tools may be available depending upon the traverse node selected.
| Control | Description |
|---|---|
|
Create a new traverse. |
|
Edit the selected traverse. |
|
Delete the selected traverses. |
 |
Add total station setups to a traverse by automatically tracing through the measurements. Available after an initial setup is added to the traverse. |
The following adjustment nodes are available.
- Traverse Loop
- Open Traverse
When an individual traverse node is selected the following columns can be displayed.
| Column | Description |
|---|---|
| # | Sequential setup number. |
| Unique Id | Unique identifier of the setup station. |
| Setup | Name of instrument setup. |
| Reference | Opening or closing reference point name. |
- Right-clicking on the column headings in the right-hand pane displays a menu that enables columns to be toggled on and off.
- In the Measurement Purpose column, select Reference for backsight measurements.
- The trace will end when it gets to a station setup that has a measurement to the first setup.
- To perform a least squares adjustment on the traverse measurements see Process Measurements.
