Create by Grade Intersection (Long Section)

Description

Create a long sections vertical intersection point using the intersection of grades from 2 points.

Access

Home / Tools / Create / Long section / Grade Intersection

Requirements

Controls

Control	Description
Name	Type a name for the created long section or click to use the next available auto incremented name. Note: The name for long sections must be unique.
Use name as layer	Do one of the following: Select the checkbox to place the long section on a layer with the same name as the long section. Clear the checkbox to place the long section on the active layer. Note: Place each long section on a different layer so you can control which long sections are visible in the long section view. If a new layer is created it is given the same settings as the layer template. If a layer template has not been specified the active layer settings are used as the default.
From	Input the from point.
Grade	Input the grade from the From point using one of the following modes: Grade (%) Grade (1:) Note: Click near the start of a line segment in the long section view, to input the grade from the start of the line to the end of the line.
Reverse Direction	Select the checkbox to apply the grade back towards the start of the alignment.

Notes

Click OK to display the location of the computed intersection points.
Click End to accept the location of the intersection points and create the long section.
A long section intersection point must be created within the extents of the horizontal alignment.
Click to discontinue inserting and return to the select mode.
Click Esc to discontinue the creation of the long section.
Use the Modify Curve tool to insert circular or parabolic curves at vertical intersection points.

Possible errors

Error	Description
The computation has no solutions.	An intersection could not be found within the extents of the horizontal alignment. You may need to reverse the direction of one of the grades or alter the grades so that the computed intersection point is within the bounds of the horizontal alignment.