| Description |
Display the coordinates of a vertex.
|
| Access |
Home / Tools / Examine / Coordinate
|
| Requirements |
- Specify a coordinate system to view scale factors.
- Specify a geoid model and a coordinate system, or a default geoid undulation to view the ellipsoid height.
|
| Controls |
The coordinate types displayed are determined by the Unit Options settings.
| Control |
Description |
| Vertex |
Enter the Vertex 'unique id' or point name. |
| Easting |
Easting coordinate. |
| Northing |
Northing coordinate. |
| Height |
Orthometric height. |
| Latitude |
Latitude. |
| Longitude |
Longitude. |
| Ellipsoidal Height |
Height above the ellipsoid. |
| Point scale factor |
Scale factor at the vertex used to compute ground distances |
| Combined scale factor |
Factor combining the point scale factor and the height correction. |
| Grid convergence |
Grid convergence at the vertex. |
|
| Notes |
- Only easting, northing and height will be displayed if the coordinate system is set to Plane and a combined scale factor is specified.
- Latitude and longitude are on the datum selected in the projects coordinate system.
- The ellipsoid height is displayed when a geographical coordinate system is selected.
- The ellipsoid height is displayed when a plane coordinate system is selected and a combined scale factor is not applied.
- If a default geoid undulation is used to compute the ellipsoid height the value followed by (Default) .
- If a user coordinate system is selected, only X,Y,Z coordinates are displayed.
|
| Related topics |
|
TOP OF PAGE