MRWA Submission - Sewer

Description

Instruction for setting up a project for a MRWA submission (Sewer).

Requirements

Xchange MRWA module

Project Attributes

Create a new project using the MRWA template for the authority you are submitting to, then add the following project attributes.

Project Attribute	Description
Municipality	Select from a list of municipality names prior to amalgamation.
File Management System	Type the File Management System identifier. Type a 10 character project reference number without special characters. The last six digits will be used to name the generated files.
Project Number	Type the project number. The text will be used in the header of the sewer asc file. This reference number can include special characters.
Stage Number	Type the stage number. The two digit number will be used to name the generated files.
Sewer Pipe Construction Date	Pick the date that the sewer pipe was constructed. This date will be used if a constructed date is not input for the pipe section.
Access Point Construction Date	Pick the date that the access chamber was constructed. This date will be used if a constructed date is not input for the access chamber.

Objects

The MRWA export uses objects on pre-defined layers to generate MRWA asc and dxf files.
Place objects on to the required layer and input the attributes predefined for the layer.

MRWA Object	Geometry	Layer	Notes
Sewer Pipe	Line (straight or arc)	Pipe-Sewer	Each pipe section (between access chambers) must be a separate line. The AutoCAD layer that the pipe is exported to in the dxf file is determined by the diameter of the sewer pipe and the line type. On export, the project attribute 'Sewer Pipe Construction Date' is used to create the 'Construction Date' attribute if it has not already been added for the pipe. A change in direction in the pipe indicates a horizontal bend. Snap change of grade points onto the pipe and then insert the points vertex into the line. The point must display the COG point symbol (See Change of Grade below.). You can run the 'Sewer Material Abbreviations' query to insert 'Material Abbreviation' and 'Packing Abbreviation' attributes based on the attribute values for 'Material' and 'Packing'.
Access Chamber	Point with the correct plan symbol for the type of access chamber.	Access Point	Access points must share a vertex with the end of the pipe. Run the 'Sewer Set Symbol' query provided with the MRWA template to automatically apply plan symbols for commonly used attributes and to view the symbol sizes that will display in the dxf file. The AutoCAD block name that is exported to the dxf file is determined by the size of the pipe and the points plan symbol. On export the project attribute 'Access Point Construction Date' is used to create the 'Construction Date' attribute if it has not already been added for the pipe.
Sewer Branch	Line	Branch	One end of the line must touch the sewer pipe. Create a line using the Line by Linear Offset tool or use the modify Snap Vertex tool to place the start of the branch on the line The height of the vertex at the end of the branch is the invert level. The branch is exported to the AutoCAD layer 49_4A. On export the branch length is copied to the Branch Length attribute for the end of branch.
Spur Branch	Line	Branch	One end of the line must touch the branch leading to the sewer pipe. The branch is exported to the AutoCAD layer 54_216A.
End of Branch	Point with SEWPT plan symbol	Branch	The point must share a vertex with the end of branch. The branch plan symbol is exported as a block to the AutoCAD layer 49_4A. The Branch Length and Surface Level attributes are automatically created and populated when the project is first exported.
Surface Point	Point	Surface	The point must have the same easting and northing coordinates as the end of branch but not share a vertex. The height of the point is the natural surface level. The branch is exported to the AutoCAD layer 54_216A. On export the surface level is copied to the Surface Level attribute for the End of Branch.

Annotations

Annotation for objects are exported to the dxf file only.
Place text on the layer specified in the tables below, alternatively you can place all text directly on the required dxf layers as specified in the Melbourne Water Survey Manual.

Some annotations can be created automatically using a predefined text rule and just need to be moved and rotated to the correct location. Other annotations must be created manually on the specified layer using text styles, symbols or blocks.
Prior to annotating, run the following queries:

Sewer Set Symbol - Update the plan symbols for points based on the points 'Shape' or 'Type' attribute. Resize the symbols to the size they will display in the dxf file. This will help you place text.
Sewer Material Abbreviation - Automatically insert a value for the pipes 'Material Abbreviation' and 'Packing Abbreviation' attributes based on the value input for the 'Material' and 'Packing' attribute. The material abbreviation is used for flow text.

Access Chambers

Annotation

Annotation Type

Layer

Linked Object

Instructions

Access Point Number

Text: Attribute (Access Point).

Access Point

Point

Select all, then use the text Rule group 'Sewer' to create text for access point names, sewer pipe inverts and branch details.
Using the Move Object command, move the text to desired location.

Note:

If you have create text using the sewer text rule the sewer invert text will already be created.
The AutoCAD layer that the access number is exported to is determined by the diameter of the sewer pipe that the access point is linked to.
The text styles used in creating the branch detail text uses attributes that are automatically populated on export of a MRWA submission. Perform a trial export to view the full text that will be exported to AutoCAD.

Access Chamber Chainage

Text: Chainage Text (Access Point or Branch Chainage (L) or Access Point or Branch Chainage (R))

17_10A

Line

Create chainage text using the Access Point or Branch Chainage text style.
When selecting the Object, select the downstream end of the pipe.
Select the checkbox Select Vertex
Click the Select Vertex control then select the access chambers where you want to place chainage text.

Note:

Use the text style 'Access Point or Branch Chainage (L)' if you want the text to the left of the sewer pipe or 'Access Point or Branch Chainage (R)' if you want the text to the right of the sewer pipe.
Text is placed perpendicular to the line.

Sewer Pipe Features and Notation

Annotation	Annotation Type	Layer	Linked Object	Instructions
Sewer Inverts	Text - Coordinate (Pipe RL)	7_2A	Line	Select the sewer pipe. Create text using the text style 'Pipe RL'. Delete any text that is not required or change the text style and layer of tangent point invert levels.
Sewer Offsets	Text - Offset (Offset - Sewer) Block - SewOff	14_26A	Point and Line	Create offset text by Existing Object using the offset text style 'Offset - Sewer (L)' or 'Offset - Sewer (R)': Select Single Vertex from the Mode list. Pick the road alignment to fill the line control. Pick the access point to fill the vertex control. Select the Allow projected offsets checkbox. Surround the text with the pointer: Select text on the layer 14_26A Create blocks by existing vertex using the 'SEWOFF' block definition. Rotate the block to be parallel to the sewer pipe using the Modify Rotation tool.
Change of Grade	Point with the COG plan symbol.	21_10A	Line	Create a point by existing vertex at the vertex where the change of grade occurs in the pipe. Select the plan symbol 'COG'. Rotate the symbol perpendicular to the line using the modify Rotation command.
Change of Grade Chainage	Text - Chainage (Miscellaneous Chainage (L) or Miscellaneous Chainage (R)).	21_10A		Copy the Miscellaneous Chainage text style and change the Format to COG {0}. Create text using the edited Miscellaneous Chainage text style. When selecting the Object, select the downstream end of the sewer pipe. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the change of grade where you want to place chainage text. Note: Use the text style 'Miscellaneous Chainage (L)' if you want the text to the left of the sewer pipe or 'Miscellaneous Chainage (R)' if you want the text to the right of the sewer pipe. Text is placed perpendicular to the line.
Tangent Point	Point (TP plan symbol)	21_10A	Line	Create a point by existing vertex at the tangent point on the line. Select the TP plan symbol.
Tangent Point Text and Chainage	Text - Chainage (Miscellaneous TP Chainage (L) or Miscellaneous TP Chainage (R)).	21_10A	Line	Create text using the Miscellaneous TP Chainage text style. When selecting the Object, select the downstream end of the sewer pipe. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the tangent point where you want to place chainage text. Note: Use the text style 'Miscellaneous TP Chainage (L)' if you want the text to the left of the sewer pipe or 'Miscellaneous TP Chainage (R)' if you want the text to the right of the sewer pipe. Text is placed perpendicular to the line.
Tangent Point Invert Level	Text - Coordinate (Miscellaneous Invert Level)	21_2A	Line	After creating sewer invert text, select the tangent point invert levels change the layer to 21_2A and the text style to 'Miscellaneous Invert Level' Move and rotate the text if required.

Sewer Pipes and Associated Flow Data

Annotation

Annotation Type

Layer

Linked Object

Instructions

Flow Arrow Text

Text - Attribute and Grade (Flow Joint Packing, Flow Material, Flow Size, Flow Grade,Flow Joint Packing (Reverse), Flow Material (Reverse), Flow Size (Reverse), Flow Grade) (Reverse)

Flow

Line

Select lines on the Pipe-Sewer layer then use the text rule group 'Flow Text' or 'Flow Text Reverse' to create the material, size, joint packing and grade text.

Note:

For a multi-segmented line create separate grade text using the 'Flow Grade (Segment)' grade text style.
The AutoCAD layer that the flow text is exported to is determined by the diameter of the sewer pipe that the flow text is linked to and the text style used for the text.
The Flow Material text style uses the pipes 'Material Abbreviation' attribute. Ensure you have inserted the attribute value or run the query 'Sewer Material Abbreviations'.
The Flow Joint Packing style uses the pipes 'Packing Abbreviation' attribute. Ensure you have inserted the attribute value or run the query 'Sewer Material Abbreviations'.
The Flow Grade text style will display the appropriate decimal places for the computed grade value.

Flow Arrow

Block (Flow Arrow)

Flow

Line

Create a point on a temporary layer by Bearing and Distance Offset
- Pick the vertex at the start of the pipe section you want to annotate as the From vertex.
- Pick the sewer line to fill the Plan Bearing control.
- Pick the sewer line to fill the distance control then add the operator /2.
- Type 10 for the offset.
Insert a block by existing vertex picking the newly created point.
Rotate the block to be parallel to the sewer and show the direction of flow using the modify Rotation command.
Explode the block to its original layer.
Move the texts created for the flow arrow to the correct insertion points.

Property Service Branches and Associated Features

Annotation	Annotation Type	Layer	Linked Object	Instructions
Branch Chainage	Text: Chainage (Access Point or Branch Chainage (L) or Access Point or Branch Chainage (R)	49_3A	Line	Create text using the Access Point or Branch Chainage text style. When selecting the Object, select the downstream end of the pipe. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the branch connection where you want to place the chainage text. Note: Use the text style 'Access Point or Branch Chainage (L)' if you want the text to the left of the sewer pipe or 'Access Point or Branch Chainage (R)' if you want the text to the right of the sewer pipe. Text is placed perpendicular to the line.
Branch Details	Text: Combined (Branch Details)	Branch	Line representing branch	Select all, then use the text Rule group 'Sewer' to create text for access point names, sewer pipe inverts and branch details. Using the Move Object command, move the text to desired location. Align the text parallel to the branch using the modify Rotation command. Move the text to free space within the lot boundary. Note: The text styles used in creating this text uses attributes that are automatically populated on export of a MRWA submission. Perform a trial export to view the full text that will be exported to AutoCAD.
Property Service Number	Text: Attribute (Property Service Number)	16_4A		Select all, then create text using the text rule ' Property Service'. Rotate and move text to an appropriate location. Note: Rotate the text parallel to the front of the lot using the modify Rotation tool. Use the modify Snap Vertex tool to align text with other property service numbers.
Branch Ties	Text: Offset (Tie Branch Offset)	Branch	Line and vertex	Create text using the offset text style 'Tie Branch Offset'. Pick the lot boundary line or the projection line where the tie will be measured to. Pick the end of branch point. Align the text on a temporary guide line inside the lot boundaries. Place text on the line using the Snap Vertex modify tool, then rotate the text perpendicular to the line where the tie was measured to, using the Rotation modify tool. Note: Create this text one at a time selecting the branch point and the property boundary. If ties are measured to a title peg create a distance text style to insert the ties. For long property boundaries copy the text style and remove the carriage return to display tie text on a single line.
Branch Projection Lines	Line	49-13A		Create a line to indicate where the tie is measured from when it is not to the nearby title boundary
Branch Tie Arrow	Line and Point with the Flow Plan Symbol	49-13B		Create only if tie distances are long or to clarify obscure dimensions. Create a line to indicate where the tie is measured to. Create a point with the 'Flow' plan symbol on one end of the line.
Branch Features (Jump-Up or Reducer)	Point with JORED plan symbol	50_3A		Note: Place a point centrally on the branch at the location of the jump-up or reducer. Insert the points vertex into the line representing the branch.
Branch Projection Lines	Line	49_13A		Create a line to indicate where the tie is measured from when it is not to the nearby title boundary
Branch Projection Line Arrows	Line and Point with Flow plan symbol	49_13B		Create a line to indicate where the tie is measured to when it is a longer distance or obscure. Create a point at the vertex of one end of the arrow shaft. Note: Selecting by layer will automatically assign the correct colour and plan symbol.
Spur Chainage	Text: Chainage text style - (Miscellaneous Chainage (L) or Miscellaneous Chainage (R)).	50_3A	Line	Copy the Miscellaneous Chainage text style and change the format to OB {0}. Create chainage text using the edited Miscellaneous Chainage text style. When selecting the Object, select the downstream end of the branch. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the spur where you want to place chainage text. Note: Use the text style 'Miscellaneous Chainage (L)' if you want the text to the left of the branch or 'Miscellaneous Chainage (R)' if you want the text to the right of the branch. Text is placed perpendicular to the line. Where a jump-up occurs at the spur, copy the text style and edit the format to JU & OB {0}.
Jump-Up Chainage	Text: Chainage text style - (Miscellaneous Chainage (L) or Miscellaneous Chainage (R)).	50_3A	Line	Copy the Miscellaneous Chainage text style and change the format to JU {0}. Create chainage text using the edited Miscellaneous Chainage text style. When selecting the Object, select the downstream end of the branch. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the Jump-Up where you want to place the text. Note: Use the text style 'Miscellaneous Chainage (L)' if you want the text to the left of the branch or 'Miscellaneous Chainage (R)' if you want the text to the right of the branch. Text is placed perpendicular to the line. Where a jump-up occurs at the spur, copy the text style and edit the format to JU & OB {0}.
Reducer Chainage	Text: Chainage text style - (Miscellaneous Chainage (L) or Miscellaneous Chainage (R)).	50_3A	Line	Copy the Miscellaneous Chainage text style and change the format to RED {0}. Create chainage text using the edited Miscellaneous Chainage text style. When selecting the Object, select the downstream end of the pipe. Select the checkbox Select Vertex Click the Select Vertex control then select the vertex at the reducer where you want to place the text. Note: Use the text style 'Miscellaneous Chainage (L)' if you want the text to the left of the sewer pipe or 'Miscellaneous Chainage (R)' if you want the text to the right of the sewer pipe. Text is placed perpendicular to the line. You may need to add multiple chainage texts and move the text. Alternatively, if multiple distances are required you can use the static text style 'Miscellaneous Chainage' and in the box, type RED then the measured distances. Align the static text perpendicular to the line using the modify Rotation tool.
Branch Bend Chainage	Text: Chainage text style - (Miscellaneous Chainage (L) or Miscellaneous Chainage (R)).	50_3A	Line	Copy the Miscellaneous Chainage text style and change the format to BEND {0}. Create chainage text using the edited Miscellaneous Chainage text style. When selecting the Object, select the downstream end of the branch. Select the checkbox Select Vertex Click the Select Vertex control then select the branch bend where you want to place chainage text. Note: Use the text style 'Miscellaneous Chainage (L)' if you want the text to the left of the branch or 'Miscellaneous Chainage (R)' if you want the text to the right of the branch. Text is placed perpendicular to the line.

Notes

Annotations and objects not required for the generation of the asc data file can be placed directly on the AutoCAD layer.
The use of field codes to automatically place objects on the correct layer will assist you in this process.
Use layer groups to manage all layers related to a sewer submission.
MRWA blocks required for the sewer submissions are represented as symbols in the project and converted to blocks on export, with the following exceptions:
- Flow Arrows - Follow the instructions to create the flow arrow with the associated attribute values.
- Sewer Offset - This block is exploded on export
Default plan symbols and colours are specified for the layers.
Specify the AutoCAD prototype file 'MRWAPrototype.dxf' when you export to MRWA to ensure symbols are exported as blocks with the correct size.
Run the 'Sewer Set Symbol' query provided with the MRWA template prior to positioning annotation to automatically apply plan symbols for commonly used attributes and to view the symbol sizes that will display in the dxf file.
Run the 'Sewer Material Abbreviations' query provided with the MRWA template to automatically insert a value for the pipes material abbreviations attribute based on the value input for the material attribute. The material abbreviations are used for flow text.
Import property boundaries to create offset and tie text.