Create a report on the total station setup, comparing the field measurements to the values computed from the grid coordinates.
Measurements / Process / 
Setup Report
A total station setup.
| Items | Description |
|---|---|
| General | Project file location, coordinate system and the date the report was generated. |
| Units | Angular and linear units. |
| Columns | Description |
|---|---|
| Instrument Height | The current instrument height set for the station setup. |
| Target Height | The current target height set for the setups backsight (reference measurement). |
| Measured Direction | The directions measured to the backsight. |
| Measured Horizontal Distance | The measured slope distance reduced to horizontal. |
| Measured Vertical Distance | The measured vertical distance. |
| Horizontal Difference | The difference between the Measured Horizontal Distance and the ground distance computed from the grid coordinates. |
| Vertical Difference | The difference between the Measured Vertical Distance and the difference in height computed from the grid coordinates. |
| Datum Difference | The difference between the measured direction and the grid bearing computed from the coordinates. |
- Setups are listed in chronological order.
- Measurement comparisons that are out of tolerance are displayed in red.
- Tolerance is computed from the Instrument precision and the configured centring and targeting errors.
- The curvature and refraction correction is applied to the slope distance if the correction is selected in the Measurement Processing Options.
- Any transformations applied will be reflected in the differences.
